Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Malabar, FL
We provide independent Lennox air duct cleaning and service across Malabar, FL, and what sets our work apart here is simple: we treat salt corrosion and sand intrusion as the main event, not an afterthought. Ocean air off the Indian River lagoon and fine scrub sand do more damage to a Lennox duct system in Malabar than mold ever will, and we clean, inspect, and repair accordingly. Duct Cleaning Palm Bay is an independent Lennox service provider, not affiliated with or authorized by the manufacturer. Call (844) 834-5154 for a free estimate.
Why Malabar Residents Choose Us for Lennox Service
Lennox systems have their own habits. Their ducted air handlers, coil designs, and control boards behave in specific ways, and the technicians we connect you with know those habits from daily hands-on work rather than from a brand badge. That matters in Malabar, where a Lennox installation faces conditions most service literature never addresses.
Our technicians have up to 9 years of experience. We use quality parts that fit your equipment, and for critical Lennox components like control boards and blower motors we favor OEM parts to keep compatibility intact. Filters, belts, and duct sealants can often come from quality aftermarket sources and still perform well, which keeps a repair sensible rather than expensive.
Scheduling is clear. We answer 24/7, fast dispatch runs from 7am to 7pm, and every job starts with a free written estimate. You’ll see before-and-after photos of your own ductwork, not a stock image. That’s the standard we hold ourselves to in Malabar.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in Malabar
These are the problems we run into most with Lennox ductwork in Malabar, and each one traces back to something specific about this stretch of coastline.
- Salt-air corrosion of metal ductwork and air handler cabinets. Malabar’s humid, salt-laden air eats at seams and cabinet panels until pinholes open and airflow drops. Corroded seams are often the first thing a video inspection shows.
- Sand and silt intrusion through return ducts after storms. Tropical storms and nor’easters drive beach sand and grit into return ducts, and from there into Lennox evaporator coils and blower wheels. Cooling drops and the blower motor works harder than it should.
- Deteriorated flex duct insulation on older Lennox installations. Original flex duct in Malabar’s older homes traps moisture once the insulation breaks down, which feeds mold growth in a climate that never really dries out.
- Corroded electrical connections and control board failures. Salt-laden air reaching a Lennox air handler, especially a garage-mounted unit, corrodes connections and can take a control board with it. That’s an electrical component, and it’s a job for a trained technician, not a homeowner with a screwdriver.
- Clogged coils and restricted supply runs. Pollen and scrub debris build up on coil faces and inside supply trunks, so a system that cooled fine last season now runs long and never quite catches up.
Lennox Service in Malabar: What Local Conditions Mean for Your Equipment
Malabar sits where the Indian River lagoon meets open coastal air, and constant ocean breezes push moist, corrosive air into HVAC systems all year. Add the surrounding scrub and unpaved shoulders, which send sand and pollen deep into return ducts, and you get a cleaning problem that looks nothing like inland Florida. Homes on large lots around Malabar need salt-air corrosion inspection on metal components and real sand and silt removal, not a mold-focused service built for a different climate.
A typical job here often starts with reduced airflow and musty odors after storm season, traced to sand and salt residue that blew into return ducts through soffit and gable vents. A qualified technician usually inspects the ductwork with video, finds corroded seams and clogged coils, then cleans the return and supply ducts, treats the evaporator coil, and applies mastic sealant to keep further salt-air intrusion out. That restores efficiency and air quality together. It’s the same work whether a Lennox system sits in a ranch-style home or a newer custom build.
Lennox Models & Products We Service in Malabar
We service Lennox ducted systems across the Merit Series, Elite Series, and Signature Collection, including the Dave Lennox Signature Collection. That covers air handlers, evaporator coils, blower assemblies, control boards, and the ductwork those components feed, whether it’s original flex duct in an older Malabar home or a rigid metal trunk-and-branch layout in a newer build.
Choosing parts is a judgment call we make per job. Control boards and blower motors get OEM parts to preserve compatibility. Duct sealants, filters, and belts can come from quality aftermarket sources when that’s the sensible choice. We repair and service Lennox equipment with parts that fit it. We don’t stock parts or claim any dealer status, and we’re clear about being independent.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Malabar
Every job is priced per system by a free written estimate, agreed before any work starts. There’s no per-vent pricing and no teaser coupon that turns into a bigger invoice once the technician is on site. That’s the bait-and-switch this trade is known for, and we won’t play it.
What drives cost in Malabar is the condition of the system: how much sand and silt has collected, whether corroded seams need mastic and insulation or full metal replacement, and whether coil treatment or duct sealing is part of the job. A cleaning-only visit on a well-kept system lands at a different figure than a storm-recovery job with corrosion repair attached.
Your written estimate breaks out the scope line by line. If something changes once the ducts are open, you hear about it before we proceed. Call (844) 834-5154 and we’ll set up a free estimate for your Lennox system in Malabar.
Serving Malabar, FL – Our Local Coverage Area
We serve Malabar and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Malabar
No. Duct Cleaning Palm Bay is an independent Lennox service provider, not manufacturer-affiliated or authorized. Our technicians work on Lennox equipment daily and know its quirks from hands-on service, not from a certification badge. Call (844) 834-5154 with questions about your system.
OEM parts for critical components like control boards and blower motors, and quality aftermarket parts for filters, belts, and duct sealants where they fit and perform well. We weigh each choice on the job. Call (844) 834-5154 to talk through your system.
Most whole-system cleanings run a few hours, and jobs with corrosion repair or coil treatment take longer. The written estimate gives you a realistic scope before anything starts. Call (844) 834-5154 to schedule.
Ducted systems across the Merit Series, Elite Series, and Signature Collection, including the Dave Lennox Signature Collection. That means air handlers, coils, blowers, control boards, and the ductwork itself. Call (844) 834-5154 to confirm your setup.
Pricing is per system by a free written estimate, agreed before work begins, with no per-vent charges. Malabar’s salt and sand conditions often add corrosion repair or coil treatment to a standard cleaning, so the estimate reflects the actual scope. Call (844) 834-5154 for an exact quote. Estimates are free.
It corrodes metal seams and air handler cabinets, opening pinholes that cut airflow and can reach control boards over time. Garage-mounted units see it first. Call (844) 834-5154 to arrange an inspection.
Have the return ducts and coil inspected before running the system long. Sand and salt residue pulled through the blower strain the motor and clog the evaporator coil. Call (844) 834-5154 and we’ll book an inspection.
Yes. Garage-mounted air handlers in Malabar take more salt-laden air than units in conditioned space, so connections and cabinets corrode faster. Regular inspection helps. Call (844) 834-5154 to schedule one.
Often, yes, when the source is sand, silt, and moisture sitting in return ducts or on a damp coil. A video inspection confirms what’s causing the smell before we clean. Call (844) 834-5154 for a free estimate.
Sometimes. Corroded seams can often be sealed with mastic and insulation, but extensively rusted metal ducts usually warrant replacement for long-term efficiency. We weigh it honestly on site. Call (844) 834-5154 to get an assessment.
Service Areas Near Malabar
We work with homeowners across Malabar and nearby communities, including Palm Bay, West Melbourne, Grant-Valkaria, June Park, and Melbourne Beach. If you’re just outside these areas, call and we’ll confirm coverage. Our Lennox work extends across the region, and you can read more about our Malabar service and our coverage in Palm Bay and Melbourne Beach.
Book Your Lennox Service in Malabar Today
Salt air and scrub sand won’t fix themselves, and a Lennox system running on clogged, corroded ducts costs you comfort every month. Call (844) 834-5154 for a free estimate. We answer 24/7, fast dispatch runs 7am to 7pm, and every job comes with a written price agreed before work starts and before-and-after photos of your own ducts. We’ll get your Lennox system in Malabar breathing clean again.
Written by the team at Duct Cleaning Palm Bay.